Left Wing Assembly

• Installed Drag Strut Braces

Pictures

Hours today     : 1.5
Hours forward  : 167.25
Hours total       : 168.75

Left Wing Assembly

• Riveted entire Drag Strut Top and Bottom
• Installed lower Half Rib that was removed previously
• Cut and shaped upper Drag Strut Gusset
• Cut to length and deburred edges and corners
• Drilled and deburred holes on upper Drag Strut Gusset
• Riveted Gusset in Place (7 Rivets, 1/2" spacing)

Pictures

Hours today     : 4.5
Hours forward : 162.75
Hours total       : 167.25

Left Wing Assembly

• Adjusted angle on short Tube Stub for Drag Strut
• Sanded Tube Stub to fit
• Slid outer Drag Strut Tube onto Stub on Root Rib using Corrosion Protectant and Lubricant
• Started lower Gusset with Clecos
• Updrilled and deburred lower Gusset Wing Spar Side and Drag Strut Side
• Permanently installed Gusset

Pictures

Hours today     : 4.50
Hours forward : 158.25
Hours total       : 162.75

Left Wing Assembly

Drag Strut Assembly and Installation

• Removed lower half rib for gusset
• Identified and fitted correct Drag Strut Braces
• Determined Gusset Position
• Affixed Drag Strut with one 1/8" x 1/4" Rivet
• Short Stub Tube on Root Rib needs a little tweaking, angle is not correct (from welding)

Pictures

Hours Today     :  4.25
Hours forward  : 154.0
Hours total        : 158.25